EMI/UCP Server Account

EMI/UCP Server account allows you to accept connections from other applications.

This type of account can be used to allow client applications to use EMI/UCP protocol to connect to SMS Studio.

EMI/UCP Server Connection Dialog

See Connection Dialog for description of the Connection, Account and Statistics tabs.

Settings tab

Listen port specifies the port number on which the application will listen for incoming connections.
Local IP address lets you specify the local IP address SMS Studio will use when creating the connection. This setting is useful if you need to select the network adapter to be used by this connection, or if your network adapter is using several IP addresses. In most cases, there is no need to change this setting (i.e. it should be set to 0.0.0.0).
Client IP address lets you specify the IP address of the client computer.
Client IP address mask lets you specify the mask used to check if the client IP address is allowed.
For example: if the client IP address is set to 192.168.0.0 and the mask is set to 255.255.255.0, then this connection will accept an incoming connection from a client only if its actual IP address is in the range from 192.168.0.0 through 192.168.0.255.
Identification required lets you specify if the client is required to send identification frame to establish the connection.
Client address lets you specify the address of the client.
Client password lets you specify the password of the client.

International prefix lets you specify the prefix for international phone numbers used in your country.
Send as Unicode lets you specify whether you wish to use Unicode data coding when sending messages.
Maximum sending rate specifies the maximum rate (in messages per second) at which the application will send messages. The application will never send messages faster than this rate. Note that you may enter a decimal value in this field.
Maximum receiving rate specifies the maximum rate (in messages per second) at which the messages can be received from the client. If this rate is reached, the incoming messages will be rejected until the current rate drops below this value. Note that you may enter a decimal value in this field.