CSP Server Connection

CSP Server connection allows you to accept connections from other SMS Studio applications through CSP protocol.

This type of connection is specifically designed for connecting CodeSegment applications.

CSP Server Connection Dialog

See Connection Dialog for description of the Connection, Account and Options tabs.

Settings tab

Listen port specifies the port number on which the application will listen for the incoming connections. Note that this port number should not be used by other connections or any other application in the system. It may also be needed that you setup your firewall and router to allow remote computers to connect through this port.
Local IP address lets you specify the local IP address SMS Studio will use when creating the connection. This setting is useful if you need to select the network adapter to be used by this connection, or if your network adapter is using several IP addresses. In most cases, there is no need to change this setting (the default value is 0.0.0.0).
Client IP address lets you specify the IP address range of the client computers that are allowed to connect through this connection. If you do not wish to check the client IP address, leave the default value for this setting (0.0.0.0).
Client IP address mask lets you specify the mask used to check if the client IP address is allowed.
For example: if the client IP address is set to 192.168.0.0 and the mask is set to 255.255.255.0, then this connection will accept an incoming connection from a client only if its actual IP address is in the range from 192.168.0.0 through 192.168.0.255.
Client user name lets you specify the user name of the client.
Client password lets you specify the password of the client.
Encrypt communication to secure data specifies whether the communication with CSP client should be encrypted.
Maximum sending rate specifies the maximum rate (in messages per second) at which the application will send messages. The application will never send messages faster than this rate. Note that you may enter a decimal value in this field.
Maximum receiving rate specifies the maximum rate (in messages per second) at which the messages can be received from the client. If this rate is reached, the incoming messages will be rejected until the current rate drops below this value. After accepting connection from the CSP client, the client will be informed about this rate and will use it as its own maximum sending rate. The client application will never send messages faster than this rate. Note that you may enter a decimal value in this field.